Panasonic PT-DW10000E, PT-D10000E manual Automatic adjustment Auto Setup

Automatic adjustment (AUTO SETUP)

How to adjust the lens for addressing unevenness of focusing

If the image is out of focus in any portion of the screen, adjust the lens by turning the adjustment screws to obtain evenness of focusing.

Lens bracket	A	Fixing screws	1.	Remove the projection lens
				cover and lens. (p. 33)
			2.	Loosen the 3 fixing screws that
				secure the lens bracket about
				two turns.

		• Tool to be used :
		Allen hex socket driver or Allen wrench (2.5 mm
		diagonal hexagon)
B	C	3. Install the lens removed in step
		1.
		4. Adjust the lens by turning the
	V up	adjustment screws A, B and C
		counterclockwise.
	H right	• Adjust the screws A, B and C after installing
		the lens.
		• Tool to be used :
		Allen hex socket driver or Allen wrench (2.5 mm
H left		diagonal hexagon)
	V bottom

Basic Operation

The instructions within parentheses apply to ceiling mount installation.

	V up is out of focus			V bottom is out of focus		H right is out of focus		H left is out of focus
A				Turn counterclockwise
	(Turn counterclockwise)			(	)	(	)	(	)
B	Turn counterclockwise					Turn counterclockwise
	(		)	(Turn counterclockwise)		(	)	(Turn counterclockwise)
C	Turn counterclockwise							Turn counterclockwise
	(		)	(Turn counterclockwise)		(Turn counterclockwise)		(	)
For example:		When the image is out of focus in the upper portion of the screen (V up):
		Turn the adjustment screws B and C little by little counterclockwise while checking evenness of
		focusing in the upper and lower portions.

Attention

•When moving the projector, return the lens to the home position (p. 38), and then tighten the 3 fixing screws to secure the lens bracket.

ENGLISH – 39