Panasonic PT-D10000E, PT-DW10000E Press to select the SUB, Press on normal screen, Restrictions

Registration of input signal data (continued)

2.Press ▲▼◄► to select the SUB

MEMORY number stored in the

“SUB MEMORY LIST”.

3.Press ENTER.

•A “Change registered signals” screen will appear.

REGISTER SUB MEMORY?

NAME	SXGA60-A1
MEMORY NO	--
INPUT	RGB1
fH	64.00kHz
fV	60.00Hz
SYNC.STATE	H(POS)
	V(POS)
ENTER REGISTER

4. Press ENTER.

■On-screen indications

#Input switching / signal switching

This shows the registered signal name on the status screen for signal switching.

INPUT	RGB1
NAME	RGB
MEMORY NO	A1(1-2)

$ Details of registered signal

REGISTERED SIGNAL STATUS

NAME	SXGA60-A1
MEMORY NO	A1(1-2)
INPUT	RGB1
fH	63.98kHz
fV	60.02Hz
SYNC.STATE	H(POS)
	V(POS)
ENTER RENAME

Note

•To rename a registered signal, perform steps 4 and 5 on page 41.

■Procedure to switch to sub memory

1.Press ◄► on normal screen

(menu is not displayed).

•The screen will show a list of the sub-memory registered for the currently entered signal.

2.Press ▲▼◄► to select the sub‑memory signal to be switched in the “SUB MEMORY LIST”.

3.Press ENTER.

•Signal will be switched to the one that was selected in Step 2.

•The designation can be set by the sub memory items.

MEMORY NO : A1 (1-2)

Sub memory number

The place in which address code (A1, A2, ..., H7 and H8) signals are registered

Note

Restrictions

•The maximum sub memory items that can be registered for the projector are 96 including the basic signal.

■How to erase sub memory

The currently selected SUB MEMORY is deleted by pressing DEFAULT at the “REGISTERED SIGNAL LIST”.

42 – ENGLISH