Panasonic PT-DW10000E, PT-D10000E manual RGB1/RGB2/DVI-D terminal input signals

*When DEFAULT is pressed, the projector automatically returns to AUTO1 or AUTO.

■RGB1/RGB2/DVI-D terminal input signals

RGB YPBPR

Note

•Refer to the types of RGB/YPBPR/DVI-D signals compatible with the projector. (p. 118)

To display pictures complying with the sRGB standard

sRGB is the international colour reproduction standard (IEC61966-2-1) established by IEC (International Electrotechnical Commission).

To reproduce colours more faithfully in compliance with the sRGB standard, perform the following setting procedure.

1.Set “COLOR MATCHING” adjustment to “OFF”. (p. 67)

2.Display the “PICTURE” screen. (p. 49)

3.Press ▲▼ to select “PICTURE

MODE”.

PICTURE

PICTURE MODE		NATURAL
CONTRAST		0
BRIGHTNESS	0
COLOR	10
TINT	1
COLOR TEMP.		DEFAULT
GAMMA		DEFAULT
SHARPNESS	0
NOISE REDUCTION		OFF
DYNAMIC IRIS		OFF
SYSTEM SELECTOR		AUTO 1
MENU SELECT
CHANGE	ENTER REGISTER

4. Press ◄► to select “NATURAL”.

5. Press ▲▼ to select “COLOR”.

PICTURE

PICTURE MODE	NATURAL
CONTRAST	0
BRIGHTNESS	0
COLOR	10
TINT	1
COLOR TEMP.	DEFAULT
GAMMA	DEFAULT
SHARPNESS	0
NOISE REDUCTION	OFF
DYNAMIC IRIS	OFF
SYSTEM SELECTOR	AUTO 1

MENU SELECT

ADJUST

6.Press DEFAULT on the remote control to restore the factory default.

7.Follow the same procedure (steps 5-6) to restore the factory default for “TINT”, “COLOR TEMP.” and “GAMMA”.

Note

•sRGB is only enable when RGB signals are being input.

Basic Operation

ENGLISH – 55