Panasonic PT-D10000E, PT-DW10000E manual Adjustment range after lens position optical shift

How to adjust the lens (continued)

Adjustment range after lens position (optical shift)

Do not move the lens beyond the bounds of the shift range as this may cause a change in the focus. This limitation is to protect the parts of the projector.

Using the standard projection position as the reference, the optical axis shift function makes it possible to adjust the projection position in the ranges shown in the figures below.

Model number of			PT-D10000E				PT-DW10000E
projection lens
	Projected screen	0.12V	0.12V	0.40V	Projected screen	0.15V	0.15V	0.50V
		height, V	Standard projection			height, V	Standard projection
			position
							position
ET-D75LE6
		0.12V	0.12V	0.40V		0.15V	15V.0	0.50V
		0.2H	0.2H			0.15H	0.15H
			Projected screen				Projected screen
Zoom			width, H				width, H
Lens
ET-D75LE1		0.1V	0.1V	0.50V		0.15V	0.15V	0.60V
	screen height, V		Standard projection		screen height, V		Standard projection
ET-D75LE2
			position				position
ET-D75LE3
ET-D75LE4	Projected		0.1V	0.50V	Projected		15V.0	0.60V
ET-D75LE8		0.1V				0.15V
		0.3H	0.3H			0.2H	0.2H
			Projected screen				Projected screen
			width, H				width, H
Note

• The ET-D75LE5 has a fixed focal point, and so shift adjustment cannot be carried out.

Moving the projection lens position to the home position

1.Press and hold LENS on the projector’s controls or SHIFT on the remote control for 3 seconds or more.

LENS

SHIFT

ENTER EXECUTE

MENU CANCEL

2.Press ENTER while the menu shown above is being displayed. (It will be displayed for about 5 seconds.)

• “PROGRESS...” will appear in the menu, and the projection lens will move to the home position.

Note

•The home position for the projection lens is the lens position when the lens is being replaced or when the projector is being stored away, and it is not the optical centre of the screen.

38 – ENGLISH