Loading

Adjustable Rack

(select models)

The Adjustable Upper Rack (select models) can be raised or lowered to accommodate taller plates, platters, pans, etc. optimizing useable space in both upper and lower racks. Full size dinner plates can be loaded in the upper rack if it is in the lower position. Always adjust the upper rack before loading.

To lower the rack:

1. Pull the rack fully out.

Adjusters

2. Place thumbs on each lever on the adjuster while holding rack with hands.

3. Press down on the levers with thumbs and push rack down.

The rack will come to a stop when it is in position.

To raise the rack:

1.Pull the rack fully out.

2.Place hands on both sides and lift up until rack comes to a stop and latches in place.

Notes

•The dishwasher will not

operate correctly if the rack wash arm connection is not aligned with one of the water inlet holes on back wall of the dishwasher.

•The left and right side adjusters on the racks must both be fully in the upward or downward position for proper connection.

Removing the Upper Rack

The rack can be removed when tall or oversized items need to be loaded into the lower rack. Unload the rack before removing it from the dishwasher.

To remove rack with push tab rack stops (select models):

1.Roll the rack 1⁄3 to 1⁄2 of the way out.

2.To remove each plastic push tab rack stop from the end of each track, push inward (toward the rack) on the ridged area of the rack stop. The rack stop will snap open and can be easily removed by pulling straight out. Take

care to support the

track while removing rack

stops.

3. Roll the rack all the way out of the track and remove from the

dishwasher.Push Tab Rack Stop

To replace:

•Reverse the above procedure to replace the rack into the dishwasher.

To remove rack with tab-lock rack stops (select models)

1.Roll the rack 1/3 to 1/2 of the way out.

2.Locate the rack stops at the end of each track. Squeeze the tab in the middle of the rack stop and pull the rack stop straight out. Take care to support the rack while removing the rack stops.

3.Roll the rack all the way out of the track and remove from the

dishwasher.

To replace:

Tab Lock

1. Replace the

 

dishwasher rack

 

by guiding the

 

wheels into the

Tab Lock

tracks.

Rack Stop

2.Push each rack stop

squarely into the end of the track until the catch pops into the small hole on the side of the track.

5

Page 5 Page 7
Page 6
Image 6
Maytag MDB-5 warranty Adjustable Rack, Removing the Upper Rack, Tab Lock, Rack Stop
Page 5 Page 7

MDB-5 specifications

The Maytag MDB-5 is a high-efficiency built-in dishwasher designed to tackle tough cleaning jobs while delivering a remarkable performance. Known for its robust construction and thoughtful engineering, the MDB-5 combines practical features with cutting-edge technologies aimed at enhancing user experience and efficiency in the kitchen.

One of the standout features of the Maytag MDB-5 is its PowerBlast Cycle. This technology harnesses high-pressure water jets that target stuck-on food particles, ensuring that every plate and utensil comes out spotless. The PowerBlast Cycle effectively combines increased water pressure, concentrated spray patterns, and heat to eliminate even the most stubborn stains, making it ideal for busy households with heavy dish use.

Durability is another key characteristic of the MDB-5. Crafted with stainless steel, both in the tub and the door, the dishwasher not only exudes a stylish look but also resists rust and chipping. This robust construction helps extend the life and performance of the dishwasher, making it a reliable long-term investment.

The MDB-5 also features a 4-blade stainless steel chopper, which efficiently chews up food remnants and prevents clogs in the dishwasher’s drain system. This innovative component works to eliminate the need for pre-rinsing, allowing users to load dirty dishes directly into the machine without worry about leftover food debris.

Energy efficiency is another important aspect of the Maytag MDB-5, designed to optimize water and energy usage while still delivering powerful cleaning. With the eco-friendly wash cycles, users can take advantage of excellent cleaning performance without increasing their utility bills. This commitment to efficiency aligns with modern consumer demands for sustainable household appliances.

In addition to its powerful cleaning capabilities, the MDB-5 is designed with user convenience in mind. Its adjustable upper rack allows for versatile loading options, making it easy to fit in larger pots and pans. The dishwasher also includes a variety of cycle options and settings, ranging from normal wash to heavy-duty, catering to different cleaning needs.

In summary, the Maytag MDB-5 incorporates a blend of power, durability, energy efficiency, and user-friendly features, making it a top choice for those in search of a dependable built-in dishwasher. With its advanced technologies and practical characteristics, the MDB-5 stands out in the crowded kitchen appliance market, promising a clean and hassle-free dishwashing experience.
Top Page Image Contents