Panasonic PT-DW10000E manual Blanking adjustment, Press to select Blanking, Press to select Total

ENGLISH – 61

Blanking adjustment

Blanking adjustment fine-tunes the images projected by the video deck or other devices when the noise appears on the edges of the screen or if a part of the image lies slightly offscreen.

1.Press ▲▼ to select “BLANKING”.

ADVANCED MENU

DIGITAL CINEMA REALITY	AUTO
BLANKING
INPUT RESOLUTION
CLAMP POSITION
EDGE BLENDING	OFF
FRAME DELAY	DEFAULT
RASTER POSITION

MENU SELECT

ENTER SUB MENU

2.Press ENTER.

•The “BLANKING” adjustment screen will be displayed.

BLANKING

UPPER	0
LOWER	0
LEFT	0
RIGHT	0
MENU SELECT
ADJUST

3.Press ▲▼ to select the desired item for adjustment.

4.Press ◄► to adjust blanking.

•The adjustment value for the PT-D10000E can be changed within a range of 0 to 255 vertically and 0 to 700 horizontally.

•The adjustment value for the PT-DW10000E can be changed within a range of 0 to 540 vertically and 0 to 960 horizontally.

When correcting the upper blanking of the

screen (top)

Press ◄ button to move the blanking zone upward; ► button to downward.

When correcting the lower blanking of the

screen (bottom)

Press ► button to move the blanking zone upward; ◄ button to downward.

When correcting the left hand blanking of the

screen (left)

Press ► button to move the blanking zone to the right; ◄ button to the left.

When correcting the right hand blanking of

the screen (right)

Press ◄ button to move the blanking zone to the right; ► button to the left.

Adjusting the input resolution

Input resolution adjustment achieves the best image when the screen flickers or halo is observed around the contour.

1. Press ▲▼ to select “INPUT RESOLUTION”.

ADVANCED MENU

DIGITAL CINEMA REALITY	AUTO
BLANKING
INPUT RESOLUTION
CLAMP POSITION
EDGE BLENDING	OFF
FRAME DELAY	DEFAULT
RASTER POSITION

MENU SELECT

ENTER SUB MENU

2.Press ENTER.

•The “INPUT RESOLUTION” screen will be displayed.

INPUT RESOLUTION

TOTAL DOTS	1344
DISPLAY DOTS	1024
TOTAL LINES	809
DISPLAY LINES	768
MENU SELECT
ADJUST

3.Press ▲▼ to select “TOTAL

DOTS”, “DISPLAY DOTS”, “TOTAL LINES” or “DISPLAY LINES”, and the press ◄► to adjust it.

•Each item automatically displays a value in response to the type of the input signal. If vertical stripes appear on the screen or the image is partly missing, increase or decrease the displayed value while observing the screen to achieve the optimal value.

Basic Operation