Panasonic PT-DW10000E Adjusting the picture, Switching the picture mode, Press to select Picture

Adjusting the picture

MENU

▲▼◄►

ENTER

DEFAULT

You can adjust pictures to suit your preference.

MENU	Press to display the
	MAIN MENU screen.

Press to select “PICTURE”.

Press to display the “PICTURE” menu.

MAIN MENU

PICTURE

POSITION

ADVANCED MENU

DISPLAY LANGUAGE

OPTION1

OPTION2

TEST PATTERN

SIGNAL LIST

NETWORK

SECURITY

MENU SELECT

ENTER SUB MENU

•Some menu items may not be valid for certain signal formats applied to the projector.

Switching the picture mode

The user can switch to the desired picture mode suitable for the image source and the environment in which this projector is used.

1.Press ▲▼ to select “PICTURE

MODE”.

PICTURE

PICTURE MODE		NATURAL
CONTRAST		0
BRIGHTNESS	0
COLOR	10
TINT	1
COLOR TEMP.		DEFAULT
GAMMA		DEFAULT
SHARPNESS	0
NOISE REDUCTION		OFF
DYNAMIC IRIS		OFF
SYSTEM SELECTOR		AUTO 1
MENU SELECT
CHANGE	ENTER REGISTER

2.Press ◄► to switch “PICTURE

MODE”.

•The setting will change as follows each time

◄► is pressed.

STANDARD CINEMA NATURAL

USER GRAPHIC DYNAMIC

•STANDARD:

The picture becomes suitable for moving images in general.

•CINEMA:

The picture becomes suitable for movie sources.

•NATURAL:

The picture complies with sRGB.

•DYNAMIC:

The picture becomes suitable for the use in well-lighted areas.

•GRAPHIC:

The picture becomes suitable for input from to the personal computer.

•USER:

The COLOR TEMP. and GAMMA settings can be adjusted.

Note

•Factory defaults are “GRAPHIC” for RGB system and “STANDARD” for moving images.

•When ENTER is pressed while “PICTURE MODE” has been selected, the picture mode which has been selected can be saved and used as the presetting when new signals are input. The data will be saved for all items in the PICTURE menu except for the SYSTEM SELECTOR setting.

Basic Operation

ENGLISH – 49