Panasonic PT-DW10000E, PT-D10000E manual Back Colour, Color

Back Colour

This sets the colour for the projection screen when no signals are being input.

1.Press ▲▼ to select “BACK

COLOR”.

OPTION1

COLOR MATCHING	OFF
LARGE SCREEN CORRECTION	OFF
AUTO SIGNAL	OFF
AUTO SETUP
BACK COLOR	BLUE
DVI EDID	EDID2(PC)
AUX DVI EDID	EDID2(PC)
P IN P	OFF
FUNC1	P IN P
OSD POSITION	2
OSD MEMORY	ON

MENU SELECT

CHANGE

2.Press ◄► to switch “BACK

COLOR”.

•The setting will change as follows each time

◄► is pressed.

BLACK BLUE LOGO1

LOGO3 LOGO2

•BLACK:

The entire projection area will appear black.

•BLUE:

The entire projection area will appear blue.

•LOGO1:

The picture registered by the user will be projected in the projection area.

•LOGO2:

The picture registered by the user will be projected in the projection area.

•LOGO3:

The Panasonic logo is projected.

Note

•Separate software is required in order to create the pictures to use for “LOGO1” and “LOGO2”. Consult your dealer.

DVI EDID

Select the EDID mode setting that corresponds to the device to be connected.

1. Press ▲▼ to select “DVI EDID”.

OPTION1

COLOR MATCHING	OFF
LARGE SCREEN CORRECTION	OFF
AUTO SIGNAL	OFF
AUTO SETUP
BACK COLOR	BLUE
DVI EDID	EDID2(PC)
AUX DVI EDID	EDID2(PC)
P IN P	OFF
FUNC1	P IN P
OSD POSITION	2
OSD MEMORY	ON

MENU SELECT

CHANGE

2. Press ◄► to switch “DVI EDID”.
• The setting will change as follows each time
	◄► is pressed.
		EDID1	EDID2 (PC)
•	EDID1 (Input signal formats supported) :
	480p, 576p, 720/60p, 720/59.94p, 720/50p,
	1	080/60i, 1 080/59.94i, 1 080/50i, 1 080/24sF,
	1	080/23.98sF, 1 080/30p, 1 080/29.97p,
	1	080/25p, 1 080/24p, 1 080/23.98p, 1 080/50p,
	1	080/59.94p, 1 080/60p
•	EDID2 (Input signal formats supported) :
	Displayable resolution:
	VGA-UXGA (non-interlace)
	Dot clock frequency: 25 MHz - 162 MHz

Note

•Interlace signals are not supported even when the EDID2 (PC) mode is selected.

Special Features

ENGLISH – 71