Panasonic PT-DW10000E, PT-D10000E manual Raster position, Press to select Raster Position

Note

•When “FRAME DELAY” is set to “SHORT”, deterioration in the picture quality will occur. Furthermore, the noise reduction function cannot be used.

Raster position

When the whole area where the input picture can be displayed is not used, the picture can be moved to any position inside the display area.

1.Press ▲▼ to select “RASTER POSITION”.

ADVANCED MENU

DIGITAL CINEMA REALITY	AUTO
BLANKING
INPUT RESOLUTION
CLAMP POSITION
EDGE BLENDING	OFF
FRAME DELAY	DEFAULT
RASTER POSITION

MENU SELECT

ENTER SUB MENU

2.Press ENTER.

•The “RASTER POSITION” screen will be displayed.

RASTER POSITION

V0

H0

ADJUST

3. Press ▲▼◄► to adjust the position.

■ PT-D10000E

When 5:4 pictures are displayed (when SXGA signals are input)

Pressing ► button will move the image to the right.

Pressing ◄ button will move the image to the left.

When 16:9 pictures are displayed

(when HDTV or 480p pictures are input or

16:9 is selected in the SIZE mode)

Pressing ▲ button will move the image upward.

Pressing ▼ button will move the image downward.

■PT-DW10000E

When 4:3 pictures are displayed

Pressing ► button will move the image to the right.

Pressing ◄ button will move the image to the left.

4.Press MENU three times.

•The on-screen indications disappear and the normal screen appears again.

Basic Operation

ENGLISH – 65