ENGLISH15
Getting Started
ControlsSide
# $ % 1 2
& ( ) * + -
. / 0
# AC IN terminal .............................................(p. 34)
Connect the supplied line power cord into this
receptacle.
Do not connect any other cable to this socket.
$ MAIN POWER switch ......................... (pp. 35, 36)
Usethisswitchtoturnon“I”andoff“○”the
commercial line power applied to the projector.
% Slot cover ....................................................(p. 28)
Install the input module here.
& POWER ON ( I ) button .......................(pp. 34, 35)
When the projector is in standby mode with the
MAIN POWER switch of the projector at the “ l ”
side, this button switches the projector to projection
mode.
( POWER STANDBY ( ) button..........(pp. 34, 36)
When the projector is in projection mode with the
MAIN POWER switch of the projector at the “ l ”
side, this button switches the projector to standby
mode.
) MENU button .......................................(pp. 46, 48)
Displays and clears the Main Menu. It can also
return to the previous screen when the menu is
displayed.
Menus can be displayed by holding down the
MENU button for at least 3 seconds while the
on-screen indication function is OFF.
*Arrow▲▼◄►buttons ......................(pp. 48, 99)
Use to select an item on the menu screen, change
setting and adjust the level.
Also use them to enter the “SECURITY” password.
+ LENS button ................................................(p. 37)
Switches to the adjustment mode for lens focus,
zoom and shift (position).
- ENTER button .............................................(p. 48)
Press this button to enter your menu selection or to
run function.
. Input select (VIDEO, S-VIDEO, RGB1, RGB2,
DVI-D, AUX) button .....................................(p. 43)
Use to change the VIDEO, S-VIDEO, RGB1,
RGB2, DVI-D and AUX (module input) input ports.
/ AUTO SETUP button ..................................(p. 44)
Pressing this button while projecting an image
automatically corrects the picture positioning on
the screen. While the auto setup feature is active,
a message “EXECUTING...” appears on the
screen.
0 Self-diagnosis display ....................(pp. 114-115)
1 LIGHT ON/OFF button
This switch is used for illuminating the connection
terminals and controls.
2 SHUTTER button ........................................ (p. 43)
Press this button to black out the image
temporarily.
Note
The AUX button to switch the input is disabled when
an optional input module is not connected.
Connection
terminals (p. 16) Controls