Information
ENGLISH – 117
Model No. PT-D10000E PT-DW10000E
Interface
ports
RGB2 input
terminal
1 set of high-density, D-sub 15p (female)
[For YPBPR input]
Y: 1.0 V [p-p] synchronization signal included, PBPR:0.7V[p-p]75Ω
[For RGB input]
0.7V[p-p]75ΩForG-SYNC:1.0V[p-p]75Ω
HD/SYNC: TTL, high-impedance, positive/negative polarity automatically adjusted
VD: TTL, high-impedance, positive/negative polarity automatically adjusted
HD/SYNC, and VD terminals are not compliant with 3-value direct SYNC.•
Video input/
output terminal
1 set BNC
1.0V[p-p]75Ω(ActivethroughforVideooutput)
S-video input
terminal
1 set Mini DIN 4p
Y1.0V[p-p]C0.286V[p-p]75ΩCompliantwithS1signals
DVI-D input
terminal
1 set
DVI 1.0 compliant
HDCP (Single link only) compatible
LAN terminal
1 set (Used for network connection)
10BASE-T/100BASE-TX
PJLink™ compatible
Serial input/
output terminal
D-sub 9-pin (female/male), RS-232C compliant
Used for personal computer control
Remote1 input/
output terminal
1 set each for M3 pin jack
Wired remote control, used for link control
Remote2 terminal D-sub 9p (female)
Used for external control
Length of power supply cord 3.0 m
Cabinet Molded resin
Outside dimensions Width: 578 mm, Height : 320 mm, Depth: 643 mm
Working environment
condition 32 kg (without lens)
Working environment
condition
Ambient temperature*3 : 0 °C to 45 °C
Ambient humidity: 10 % to 80 % (no condensation)
Remote
control
Power source 3 V DC (two AA dry cells)
Operation range approx. 30 m (in front of beam receiver)
Mass 134 g (including dry cells)
Outside
dimensions Width: 51 mm, Thickness: 23 mm, Depth: 176 mm
Option
Hanging attachment (For high ceiling): ET-PKD100H
Hanging attachment (For low ceiling): ET-PKD100S
Projection lens: ET-D75LE1, ET-D75LE2, ET-D75LE3, ET-D75LE4,
ET-D75LE5, ET-D75LE6, ET-D75LE8
DVI-D input module: ET-MD77DV
SD-SDI input module: ET-MD77SD1
HD/SD-SDI input module: ET-MD77SD3
Replacement Lamp Unit: ET-LAD10000 (single bulb), ET-LAD1000F (4 bulbs)
*1 Interlace signals are not supported even when the EDID2 mode is selected.*270˝–300˝forET-D75LE5*3 If using the projector at high altitudes (1 400-2 700 m), the ambient operating temperature should be 0°-40°C.