Panasonic PT-D10000E Using the PJLink protocol, Supported commands, PJLink security authorization

Using the PJLink™ protocol

The network functions of this projector are compatible with PJLink™ Class 1, and so the PJLink™ protocol can be used to carry out the following operations from a computer.

•Projector settings

•Querying the projector status

Supported commands

The following table lists the PJLink™ protocol commands that can be used to control the projector.

Command	Control details			Notes
		Parameters
POWR	Power supply control	0 = Standby
		1 = Power ON
		Parameters
POWR ?	Power supply status query	0 = Standby	1 = Power ON
		2 = Cool-down in progress 3 = Warm-up in progress
INPT	Input selection	Parameters
		11 = RGB1	12 =RGB2
		21 = VIDEO	22 = S-VIDEO
		31 = DVI-D
INPT ?	Input selection query	32 = AUX (only enabled if ET-MD77DV, ET-MD77SD1 or ET-MD77SD3 is
		installed)
AVMT	Shutter control	Parameters
		30 = Shutter mode off (picture mute cancelled)
AVMT ?	Shutter mode query
		31 = Shutter mode on (picture mute)
		Parameters
		1st byte:	Indicates fan errors, range 0--2
		2nd byte:	Indicates lamp errors, range 0--2
		3rd byte:	Indicates temperature errors, range 0--2
ERST?	Error status query	4th byte:	Fixed at 0
		5th byte:	Indicates filter errors, range 0--2
		6th byte: Indicates other errors, range 0--2
		Definitions for each value from 0 to 2 are as follows.
		0 = No error known		1 = Warning	2 = Error
		Parameters
		1st digits (1--5 digits): Lamp 1 cumulative operating time
		2nd digit: 0 = Lamp 1 off, 1 = Lamp 1 on
		3rd digits (1--5 digits): Lamp 2 cumulative operating time
LAMP ?	Lamp status query	4th digit: 0 = Lamp 2 off, 1 = Lamp 2 on
		5th digits (1--5 digits): Lamp 3 cumulative operating time
		6th digit: 0 = Lamp 3 off, 1 = Lamp 1 on
		7th digits (1--5 digits): Lamp 4 cumulative operating time
		8th digit: 0 = Lamp 4 off, 1 = Lamp 2 on
		The following are returned as parameters.
INST ?	Input selection list query	“11 12 21 22 31” (If any of the ET-MD77DV, ET-MD77SD1 or ET-MD77SD3 are
		installed, “11 12 31 22 31 32” is returned.)
NAME ?	Projector name query	The name set for “HOST NAME” in “NETWORK” is returned.
INF1 ?	Manufacturer name query	“Panasonic” is returned.
INF2 ?	Model name query	“D10000” or “DW10000” is returned.
INFO ?	Other information query	Information such as version number is returned.
CLSS ?	Class information query	“1” is returned.

■PJLink™ security authorization

The password used for PJLink™ is the same as the password which has been set for web browser control. If you would like to use PJLink™ without authorization being used, leave the password for web browser control blank.

•PJLink™ is a pending trademark in Japan, the United States and other countries and regions.

For details on PJLink™ specifications, refer to the Japan Business Machine and Information System Industries Association website. The URL is http://pjlink.jbmia.or.jp/english/

98 – ENGLISH