MultiVOIP User Guide

Quick Start Instructions

 

 

Placement

Mount your MultiVOIP in a safe and convenient location where cables for your network and phone system are accessible. Rack-mounting instructions are in Chapter 3: Mechanical Installation & Cabling.

The Command/Control Computer (Specs & Settings)

The computer used for command and control of the MultiVOIP

(a)must be an IBM-compatible PC,

(b)must use a Microsoft operating system,

(c)must be connected to your local network (Ethernet) system, and

(d)must have an available serial COM port.

The configuration tasks and control tasks the PC will have to do with the MultiVOIP are not especially demanding. Still, we recommend using a reasonably new computer. The computer that you use to configure your MultiVOIP need not be dedicated to the MultiVOIP after installation is complete.

COM port on controller PC. You’ll need an available COM port on the controller PC. You’ll need to know which COM port is available for use with the MultiVOIP (COM1, COM2, etc.).

51

Page 51
Image 51
Multi-Tech Systems MVP-410ST/810ST, MVP-130/130FXS, MVP-2410/3010 manual Placement, Command/Control Computer Specs & Settings