Multi-Tech Systems MVP-2410/3010, MVP-410ST/810ST, MVP-130/130FXS manual 245, For Min. and Max

MultiVOIP User Guide		Technical Configuration (Analog/BRI)
	FXS Loop Start Interface: Parameter Definitions (cont’d)
	Field Name	Values	Description
	Flash Hook Options fields
	Generation	--	not applicable to FXS interface
	Detection	for Min. and Max.,	For a received flash hook to be
	Range	50 - 1500	regarded as such by the
		milliseconds	MultiVOIP, its duration must
			fall between the minimum and
			maximum values given here.
	Pass Through	Y/N	When enabled, this parameter
	Enable		creates an open audio path
			through the MultiVOIP.
			If the Pass-Through feature is
			enabled, the AutoCall feature
			must be enabled for this voip
			channel in the Voice/Fax
			Parameters screen.
	Caller ID fields
	Caller ID Type	Bellcore	The MultiVOIP currently
			supports only one
			implementation of Caller ID.
			That implementation is Bellcore
			type 1 with Caller ID placed
			between the first and second
			rings of the call.
	Caller ID	Y/N	Caller ID information is a
	enable		description of the remote
			calling party received by the
			called party. The description
			has three parts: name of caller,
			phone number of caller, and
			time of call. The ‘time-of-call’
			portion is always generated by
			the receiving MultiVOIP unit
			(on FXS channel) based on its
			date and time setup.

245