Multi-Tech Systems MVP-2410/3010, MVP-410ST/810ST, MVP-130/130FXS 251, Flash Hook Options fields

MultiVOIP User Guide		Technical Configuration (Analog/BRI)
	FXO Interface: Parameter Definitions (cont’d)
	Field Name	Values	Description
	Flash Hook Options fields
	Generation	50 - 1500	Length of flash hook that will
		milliseconds	be generated and sent out when
			the remote end initiates a flash
			hook and it is regenerated
			locally. Default = 600 ms.
	Detection	--	Not applicable to FXO.
	Range
	Caller ID fields
	Caller ID Type	Bellcore	The MultiVOIP currently
			supports only one
			implementation of Caller ID.
			That implementation is Bellcore
			type 1 with caller ID placed
			between the first and second
			rings of the call.
	Caller ID	Y/N	Caller ID information is a
	enable		description of the remote
			calling party received by the
			called party. The description
			has three parts: name of caller,
			phone number of caller, and
			time of call. The ‘time-of-call’
			portion is always generated by
			the receiving MultiVOIP unit
			(on FXS channel) based on its
			date and time setup. The forms
			of the ‘Caller Name’ and ‘Caller
			Phone Number’ differ
			depending on the IP
			transmission protocol used
			(H.323, SIP, or SPP) and upon
			entries in the phonebook
			screens of the remote (CID
			generating) voip unit. The CID
			Name and Number appearing
			on the phone at the terminating
			FXS end will come either from a
			central office switch (showing a
			PSTN phone number), or the
			phonebook of the remote (CID
			sending) voip unit.

251