Multi-Tech Systems MVP-130/130FXS, MVP-410ST/810ST, MVP-2410/3010 manual 244, Fxs

Technical Configuration (Analog/BRI) MultiVOIP User Guide

FXS Loop Start Interface: Parameter Definitions (cont’d)

Field Name	Values	Description
Dialing Options fields
Inter Digit	1 - 10 seconds	This is the length of time that
Timer		the MultiVOIP will wait
		between digits. When the time
		expires, the MultiVOIP will
		look in the outbound
		phonebook for the number
		entered and place the call
		accordingly.
		Default = 2.
Message	--	Not applicable to FXS Loop
Waiting		Start interface
Indication
Inter Digit	in milliseconds	The length of time between the
Regeneration		outputting of DTMF digits.
		Default = 100 ms.
Time
Ring Count,	1-99	Maximum number of rings that
FXS		the MultiVOIP will issue before
		giving up the attempted call.
FXS Options,	Y/N	When enabled, the MultiVOIP
Current Loss		will interrupt loop current in
		the FXS circuit to initiate a
		disconnection. This tells the
		device connected to the FXS
		port to hang up. The Multi-
		VOIP cannot drop the call; the
		FXS device must go on hook.

244