Multi-Tech Systems MVP-2410/3010, MVP-410ST/810ST, MVP-130/130FXS manual 164

Technical Configuration (T1/E1) MultiVOIP User Guide

E1 Parameter Definitions (cont’d)

ISDN Parameters
Field Name	Values	Description
Enable	Y/N	If digital connection is ISDN-
ISDN-PRI		PRI type, this box should be
		checked. When ISDN is
		enabled, the “CAS Protocols”
		field is grayed out (ISDN has its
		own signaling method).
Terminal/	either	When “Terminal” is selected, it
Network	“Terminal” or	indicates that the MultiVOIP
	“Network”	should emulate the subscriber
		(terminal) side of the digital
		connection. When “Network”
		is selected, it indicates that the
		MultiVOIP should emulate the
		central office (network) side of
		the digital connection.
		Setting used for MultiVOIP
		must be opposite to the setting
		used in the PBX. For example,
		if the PBX is set to “Terminal,”
		then the MultiVOIP must be set
		to “Network.”
Country	see table, later	Country in which MultiVOIP is
	this chapter	operating with ISDN.
Operator	see table, later	Indicates phone switch
	this chapter	manufacturer/model or refers
		to telco so as to specify the
		switching system in question.
		ISDN is implemented
		somewhat differently in
		different switches.
Note on	__	[ISDN implementation options
Country &		are shown, arranged by
Operator		country, in a table below – soon
options.		after E1 Parameter Definitions.]

164