Multi-Tech Systems MVP-2410/3010, MVP-410ST/810ST, MVP-130/130FXS manual Tone Pair Values, 176

Technical Configuration (T1/E1) MultiVOIP User Guide

The Custom Tone-Pair Settings fields are described in the table below.

Custom Tone-Pair Settings Definitions

Field Name	Values	Description
Tone Pair	dial tone	Identifies the type of telephony
	busy tone	signaling tone for which
	ring tone,	frequencies are being specified.
	‘unobtainable’ &
	re-order tones
TONE PAIR	VALUES	About Defaults: US telephony
		values are used as defaults on
		this screen. However, since this
		dialog box is provided to allow
		custom tone-pair settings,
		default values are essentially
		irrelevant.
Frequency 1	frequency in	Frequency of lower tone of pair.
	Hertz	This outbound tone pair enters
		the MultiVOIP at the T1/E1 port.
Frequency 2	frequency in	Frequency of higher tone of pair.
	Hertz	This outbound tone pair enters
		the MultiVOIP at the T1/E1 port.
Gain 1	gain in dB	Amplification factor of lower
	+3dB to –31dB	frequency of pair. This figure
	and “mute”	describes amplification that the
		MultiVOIP applies to outbound
	setting
		tones entering the MultiVOIP at
		the T1 port. Default = -16dB
Gain 2	gain in dB	Amplification factor of higher
	+3dB to –31dB	frequency of pair. This figure
	and “mute”	describes amplification that the
	setting	MultiVOIP applies to outbound
		tones entering the MultiVOIP at
		the T1 port. Default = -16dB

176