Multi-Tech Systems MVP-130/130FXS, MVP-410ST/810ST, MVP-2410/3010 manual 313, Parameters

MultiVOIP User Guide T1 PhoneBook Configuration

In consultation with your VOIP administrator, enter the Gateway Name determine which protocol you will use (H.323, SIP, or SPP). Then fill in the IP address, signaling port, and other parameters, as needed. (The parameters needed for each protocol are different.)

The table below describes all fields in the general PhoneBook Configuration screen.

PhoneBook Configuration Parameter Definitions

Field Name	Values	Description
Gateway	Y/N	This field allows you to specify
Name		a name for this MultiVOIP.
		When placing a call, this name
		is sent to the remote
		MultiVOIP for display in Call
		Progress listings, Logs, etc.
	H.323 Parameters
Use Fast Start	Y/N	Enables the H.323 Fast Start
		procedure. May need to be
		enabled/disabled for
		compatibility with third-party
		VOIP gateways.
Signaling Port	port	Default: 1720 (H.323)
	number
	GateKeeper RAS Parameters
Gatekeeper /	n.n.n.n,	IP address of the GateKeeper.
IP Address	for n =
	0 - 255
Signaling Port		Well-known port number for
		GateKeepers.
		Must match port number of
		GateKeeper, 1719.
Gatekeeper	alpha-	Optional. The name of the
Name	numeric	GateKeeper with which this
	string	MultiVOIP is trying to register.

313