Multi-Tech Systems MVP-410ST/810ST, MVP-130/130FXS, MVP-2410/3010 manual 246

Technical Configuration (Analog/BRI) MultiVOIP User Guide

FXS Loop Start Interface: Parameter Definitions (cont’d)

Field Name	Values	Description
Caller ID fields
Caller ID	Y/N	The forms of the ‘Caller Name’
enable (cont’d)		and ‘Caller Phone Number’
		differ depending on the IP
		transmission protocol used
		(H.323, SIP, or SPP) and upon
		entries in the phonebook
		screens of the remote (CID
		generating) voip unit. The CID
		Name and Number appearing
		on the phone at the terminating
		FXS end will come either from a
		central office switch (showing a
		PSTN phone number), or the
		phonebook of the remote (CID
		sending) voip unit.

The Caller ID feature has dependencies on both the telco central office and the MultiVOIP phone book. See the diagram series after the FXO Parameters section below.

246