Multi-Tech Systems MVP-130/130FXS, MVP-410ST/810ST, MVP-2410/3010 manual 193

MultiVOIP User Guide Technical Configuration (T1/E1)

Supplementary Services Definitions (cont’d)

Field Name	Values	Description
Call Hold	Y/N	Select to enable Call Hold function in
Enable		voip unit.
		Call Hold allows one party to
		maintain an idle (non-talking)
		connection with another party while
		receiving another call (Call Waiting),
		while initiating another call (Call
		Transfer), or while performing some
		other call management function.
Hold	phone	The numbers and/or symbols that the
Sequence	keypad	caller must press on the phone
	characters	keypad to initiate a call hold.
		The call-hold sequence can be 1 to 4
		characters in length using any
		combination of digits or characters
		(* or #).
Call Waiting	Y/N	Select to enable Call Waiting function
Enable		in voip unit.
Retrieve	phone	The numbers and/or symbols that the
Sequence	keypad	caller must press on the phone
	characters,	keypad to initiate retrieval of a
	two	waiting call.
	characters	The call-waiting retrieval sequence
	in length	can be 1 to 4 characters in length
		using any combination of digits or
		characters
		(* or #).
		This is the phone keypad sequence
		that a user must press to retrieve a
		waiting call. Customize-able.
		Sequence should be distinct from
		sequence that might be used to
		retrieve a waiting call via the PBX or
		PSTN.

193