Multi-Tech Systems MVP-130/130FXS, MVP-410ST/810ST manual 325, This field currently disabled

MultiVOIP User Guide			T1 PhoneBook Configuration
	Add/Edit Outbound Phone Book: Field Definitions
		(cont’d)
	Field Name	Values	Description
	Destination	prefixes,	Defines the beginning of
	Pattern	area codes,	dialing sequences for calls
		exchanges,	that will be connected to
		line	another VOIP in the system.
		numbers,	Numbers beginning with
		extensions	these sequences are diverted
			from the PTSN and carried
			on Internet or other IP
			network.
	Total Digits	as needed	This field currently disabled.
			number of digits the phone
			user must dial to reach
			specified destination.
	Remove Prefix	dialed digits	portion of dialed number to
			be removed before
			completing call to destination
	Add Prefix	dialed digits	digits to be added before
			completing call to destination
	IP Address	n.n.n.n	the IP address to which the
		for	call will be directed if it
		n = 0-255	begins with the destination
			pattern given
	Description	alpha-	Describes the facility or
		numeric	geographical location at
			which the call will be
			completed.
	Protocol Type	SIP or H.323	Indicates protocol to be used in
		or SPP	outbound transmission. Single
			Port Protocol (SPP) is a non-
			standard protocol designed by
			Multi-Tech.

325