Multi-Tech Systems MVP-410ST/810ST, MVP-130/130FXS, MVP-2410/3010 manual 276, MVP810ST

Technical Configuration (Analog/BRI)			MultiVOIP User Guide
	“Regional Parameter” Definitions (cont’d)
	Field Name	Values	Description
	Cadence	n/n/n/n	On/off pattern of tone durations
	(msec) On/Off	four integer time	used to denote phone ringing,
		values in	phone busy, connection
		milli-seconds;	unobtainable (fast busy), dial tone
		zero value for	(“0” indicates continuous tone),
		dial-tone	survivability, and re-order. Default
		indicates	values differ for different
		continuous tone	countries/regions. Although most
			cadences have only two parts (an
			“on” duration and an “off”
			duration), some telephony
			cadences have four parts. Most
			cadences, then, are expressed as
			two iterations of a two-part
			sequence. Although this is
			redundant, it is necessary to allow
			for expression of 4-part cadences.
	Custom	--	Click on the “Custom” button to
	(button)		bring up the Custom Tone Pair
			Settings screen. (The “Custom”
			button is active only when
			“Custom” is selected in the
			Country/Region field.) This screen
			allows the user to specify tone pair
			attributes that are not found in any
			of the standard national/regional
			telephony toning schemes.
	Country	country name	MultiVOIP units operating with
	Selection for		the X.06 software release (and
	Built-In		above) include a built-in modem.
			The administrator can dial into this
	Modem
			modem to configure the MultiVOIP
	(not applicable
			unit remotely. The country name
	to MVP-
			values in this field set telephony
	130/130FXS
			parameters that allow the modem
	MVP210,
			to work in the listed country. This
	MVP410ST, or		value may be different than the
	MVP810ST)		Country/Region value. For
			example, a user may need to
			choose “Europe” as the
			Country/Region value but
			“Denmark” as the Country-
			Selection-for-Built-In-Modem
			value.

276