Multi-Tech Systems MVP-410ST/810ST, MVP-130/130FXS manual Modem Relay, Optimization Factor, 150

Technical Configuration (T1/E1) MultiVOIP User Guide

Voice/Fax Parameter Definitions (cont’d)

Field Name	Values	Description
Dynamic Jitter Buffer
Parameters
Maximum	60 to 400	The default maximum dynamic
Jitter Value	ms	jitter buffer of 300 milliseconds is
		the maximum delay tolerable over a
		high jitter network.
		Default = 300 msec
Optimizat-	0 to 12	The Optimization Factor
ion Factor		determines how quickly the length
		of the Dynamic Jitter Buffer is
		changed based on actual jitter
		encountered on the network.
		Selecting the minimum value of 0
		means low voice delay is desired,
		but increases the possibility of jitter-
		induced voice quality problems.
		Selecting the maximum value of 12
		means highest voice quality under
		jitter conditions is desired at the
		cost of increased voice delay.
		Default = 7.

Modem Relay

To place modem traffic onto the voip network (an application called “modem relay”), use Coder G.711 mu-law at 64kbps.

150