Multi-Tech Systems MVP-130/130FXS IP Parameter Definitions Field Name Values Description, 136

Technical Configuration (T1/E1) MultiVOIP User Guide

The IP Parameters fields are described in the table below.

IP Parameter Definitions

Field Name	Values	Description
DiffServ	DiffServ PHB (Per Hop Behavior) values
Parameter	pertain to a differential prioritizing
fields	system for IP packets as handled by
	DiffServ-compatible routers. There are 64
	values, each with an elaborate technical
	description. These descriptions are found in
	TCP/IP standards RFC2474, RFC2597, and,
	for present purposes, in RFC3246, which
	describes the value 34 (34 decimal; 22 hex) for
	Assured Forwarding behavior (default for
	Call Control PHB) and the value 46 (46
	decimal; 2E hexadecimal) for Expedited
	Forwarding behavior (default for Voip Media
	PHB). Before using values other than these
	default values of 34 and 46, consult these
	standards documents and/or a qualified IP
	telecommunications engineer.
	To disable DiffServ, configure both fields to 0
	decimal.
	The next page explains DiffServ in the
	context of the IP datagram.
Call Control	0 – 63	Value is used to
PHB	default = 34	prioritize call setup IP
		packets.
Voip Media	0 – 63	Value is used to
PHB	default = 46	prioritize the RTP/RTCP
		audio IP packets.
Frame Type	Type II, SNAP	Must be set to match
		network’s frame type.
		Default is Type II.

136