Multi-Tech Systems MVP-2410/3010 Analog MultiVOIP Hookup MVP-410/810, Hookup for MVP410 & MVP810

MultiVOIP User Guide Quick Start Instructions

Hookup for MVP410 & MVP810

Analog MultiVOIP Hookup

MVP-410/810

MVP810 has 8 connector pairs. MVP410 has 4 connector pairs. Only 1 connector of any pair is used at a time.

Cabling to computer running	Power Cable
	Receptacle Grounding
MultiVOIP software.
Connector at MultiVOIP: DB-25.	Screw:
Connector at computer: DB-9.	Connect to
	Earth Ground

E&M FXS/FXO E&M FXS/FXO	E&M FXS/FXO	E&M FXS/FXO	Command Command	Ethernet
E&M FXS/FXO E&M FXS/FXO	E&M FXS/FXO	E&M FXS/FXO Modem

Cabling to phone equipment.

E&M (RJ-45 connector): connects to E&M trunk line from PBX or telco office.

On/Off Switch

Cabling to your IP network.

RJ-45 connector.

FXS (RJ-11 connector):	FXO (RJ-11 connector):
connects to phone, fax,	connects to analog phone line
or key phone system.	or analog PBX extension.

DID-DPO(RJ-11 connector): connects to DID line

from telco office. DPO functionality not yet supported.

Cabling to POTS line, for remote configuration. RJ-11 connector.

53