Multi-Tech Systems MVP-2410/3010, MVP-410ST/810ST, MVP-130/130FXS Power Cable Molex Connector, 500

T1/E1 Expansion Cards MultiVOIP User Guide

Power Cable

Molex Connector

Figure A-2: MVP2410/3010 Chassis (top/rear view)

4.While keeping the power cable out of the way, fit the MVP24-48 or MVP30-60 card into the grooves of the expansion slot. Push it in far enough to allow connection of the power cable to the receptacle on the vertical plate of the expansion card. (See Figure A-2.) Connect the power cable.

5.Push the expansion card fully into the chassis. See Figure A-3.

Figure A-3: Sliding Expansion Card into Chassis

Secure the vertical plate of the expansion card to the chassis with a screw.

500