MultiVOIP User Guide

T1 PhoneBook Configuration

 

 

Add/Edit Inbound Phone Book: Field Definitions

(cont’d)

Field Name

Values and Description

Ring Count

0, 1, 2, 3, etc. When “No Response” is

 

condition for forwarding calls, this

 

determines how many unanswered rings

 

are needed to trigger the forwarding.

 

 

Registration

In an H.323 voip system, gateways can

Option

register with the system using one of these

Parameters

identifiers: (a) an E.164 identifier, (b) a Tech

 

Prefix identifier, or

 

(c) an H.323 ID identifier.

 

In a SIP voip system, gateways can register

 

with the SIP Proxy.

 

In an SPP voip system, gateways can register

 

with the SPP Registrar voip unit.

 

 

6.When your Outbound and Inbound PhoneBook entries are completed, click on Save Setup in the sidebar menu to save your configuration.

You can change your configuration at any time as needed for your system.

Remember that the initial MVP2410 setup must be done locally or via the built-in Remote Configuration/Command Modem using the MultiVOIP program. After the initial configuration is complete, all of the MVP2410 units in the VOIP system can be configured, re- configured, and updated from one location using the MultiVOIP web GUI software program or the MultiVOIP program (in conjunction with the built-in modem).

335

Page 335
Image 335
Multi-Tech Systems MVP-2410/3010, MVP-410ST/810ST, MVP-130/130FXS manual 335