274

Technical Configuration (Analog/BRI)	MultiVOIP User Guide

The Regional Parameters fields are described in the table below.

“Regional Parameter” Definitions

Field Name	Values	Description
Country/	USA, Japan, UK,	Name of a country or region that
Region	Custom	uses a certain set of tone pairs for
		dial tone, ring tone, busy tone,
		unobtainable tone (fast busy tone),
		survivability tone (tone heard
		briefly, 2 seconds, after going
		offhook denoting survivable mode
		of VOIP unit), re-order tone (a tone
		pattern indicating the need for the
		user to hang up the phone), and
		intercept tone (a tone that warns an
		a party that has gone off hook but
		has not begun dialing, within a
		prescribed time, that an automatic
		emergency or attendant number
		will be called; the automatic call
		can be used to direct an attendant’s
		attention to a disabled or distressed
		caller, allowing an appropriate
		response to be made).
		In some cases, the tone-pair scheme
		denoted by a country name may
		also be used outside of that
		country. The “Custom” option
		(button) assures that any tone-
		pairing scheme worldwide can be
		accommodated.
		Note: Intercept tone is applicable
		only when the FXS telephony
		interface has been chosen in the
		Interface screen and when the
		AutoCall / OffHook Alert field is set
		to OffHook Alert in the Voice/Fax
		Parameters screen. The time
		allowed for dialing before the
		automatic calling process begins is
		set in the Offhook Alert Timer field
		of the Voice/Fax Parameters
		screen.