Quick Start InstructionsMultiVOIP User Guide
Phone/IP Details *Absolutely Needed* (cont’d)
Gather Telephone Information (E1)
9 E1 Phone Parameters | Info needed to operate: |
Ask phone company or | MVP3010 |
| |
PBX maintainer. |
|
|
|
#E1 Telephony Parameters: Record for this VOIP Site
•Which frame format is used? Double Frame_____
MultiFrame w/ CRC4_____
MultiFrame w/ CRC4 modified_____
•Which CAS or PRI protocol is used? ______________
•Clocking: Does the PBX or telco switch use
internal or external clocking? _________________
Note that the setting used in the voip unit will be the opposite of the setting used by the telco/PBX.
•Which line coding is used? AMI___ or HDB3___
•Pulse shape level?: (most commonly 0 to 40 meters)
Gather Telephone Information (Analog)
9 Analog Phone Parameters | Needed for: |
Ask phone company or | MVP810 |
MVP410 | |
telecom manager. | MVP210 |
| |
| MVP130 |
| MVP130FXS |
#Analog Telephony Interface Parameters:
Record for this VOIP Site
•Which interface type (or “signaling”) is used?
E&M_____ FXS/FXO_____
•If FXS, determine whether the line will be used for a phone, fax, or KTS (key telephone system)
•If FXO, determine if line will be an analog PBX extension or an analog line from a telco central office
•If E&M, determine these aspects of the E&M trunk line from the PBX:
• What is its Type (1, 2, 3, 4, or 5)?
• Is it
• Is it
48
