MultiVOIP User Guide

Technical Configuration (T1/E1)

 

 

The SNMP Parameter fields are described in the table below.

SNMP Parameter Definitions

Field Name

Values

Description

 

 

 

Enable SNMP

Y/N

Enables the SNMP code in the

Agent

 

firmware of the MultiVOIP. This

 

 

must be enabled for the MultiVOIP

 

 

to communicate with and be

 

 

controllable by the

 

 

MultiVoipManager software.

 

 

Default: disabled

 

 

 

Trap Manager

Parameters

 

 

 

 

Address

4 places; n.n.n.n

IP address of MultiVoipManager

 

n = 0-255

PC.

 

 

 

Community

--

A “community” is a group of VOIP

Name

 

endpoints that can communicate

 

 

with each other. Often “public” is

 

 

used to designate a grouping where

 

 

all end users have access to entire

 

 

VOIP network. However, calling

 

 

permissions can be configured to

 

 

restrict access as needed.

 

 

 

Port Number

162

The default port number of the

 

 

SNMP manager receiving the traps

 

 

is the standard port 162.

Community

Length = 19

First community grouping.

Name 1

characters (max.)

 

 

Case sensitive.

 

 

 

 

Permissions

Read-Only,

If this community needs to change

 

Read/Write

MultiVOIP settings, select

 

Read/Write. Otherwise, select

 

 

 

 

Read-Only to view settings.

 

 

 

Community

Length = 19

Second community grouping

Name 2

characters (max.)

 

 

Case sensitive.

 

 

 

 

Permissions

Read-Only,

If this community needs to change

 

Read/Write

MultiVOIP settings, select

 

Read/Write. Otherwise, select

 

 

Read-Only to view settings.

169

Page 169
Image 169
Multi-Tech Systems MVP-130/130FXS Snmp Parameter Definitions Field Name Values Description, Trap Manager Parameters, 169