Multi-Tech Systems MVP-410ST/810ST, MVP-130/130FXS, MVP-2410/3010 manual 225

MultiVOIP User Guide			Technical Configuration (Analog/BRI)
	IP Parameter Definitions (cont’d)
	Field Name		Values	Description
	FTP Parameter fields
	FTP Server		Y/N	MultiVOIP unit has an
	Enable		Default = disabled	FTP Server function so
			See “FTP Server	that firmware and other
			File Transfers” in	important operating
			Operation &	software files can be
			Maintenance	transferred to the voip
			chapter.	via the network.
	TSM Routing Option Parameter
		fields
	Use TDM		Y/N;	Allows calls placed
	Routing for		enabled by	between ports on the
	Intra-Gateway		default	same MultiVOIP voice
	calls			channel board to be
				routed over internal
				Time Division
				Multiplex bus without
				conversion to IP. TDM
				routing effectively
				eliminates the delay
				introduced by IP
				conversion.
				If you require all calls
				to be IP routed,
				disable the “use TDM
				Routing for Intra-
				Gateway Calls”
				option. Since this is
				not normally required,
				we generally
				recommend leaving
				TDM Routing enabled.
				Not applicable to MVP-
				130/130FXS.

225