Multi-Tech Systems MVP-410ST/810ST, MVP-130/130FXS, MVP-2410/3010 manual Jitter, 237

MultiVOIP User Guide			Technical Configuration (Analog/BRI)
	Voice/Fax Parameter Definitions (cont’d) )
	Field Name	Values		Description
	Dynamic	Jitter
	Dynamic			Dynamic Jitter defines a minimum
	Jitter Buffer			and a maximum jitter value for
				voice communications. When
				receiving voice packets from a
				remote MultiVOIP, varying delays
				between packets may occur due to
				network traffic problems. This is
				called Jitter. To compensate, the
				MultiVOIP uses a Dynamic Jitter
				Buffer. The Jitter Buffer enables the
				MultiVOIP to wait for delayed
				voice packets by automatically
				adjusting the length of the Jitter
				Buffer between configurable
				minimum and maximum values.
				An Optimization Factor adjustment
				controls how quickly the length of
				the Jitter Buffer is increased when
				jitter increases on the network. The
				length of the jitter buffer directly
				effects the voice delay between
				MultiVOIP gateways.
	Minimum	60 to 400		The minimum dynamic jitter buffer
	Jitter Value	ms		of 60 milliseconds is the minimum
				delay that would be acceptable over
				a low jitter network.
				Default = 150 msec

237