Multi-Tech Systems MVP-130/130FXS, MVP-410ST/810ST manual Party, Busy Party, and Connected, 295

MultiVOIP User Guide			Technical Configuration (Analog/BRI)
	Supplementary Services Definitions (cont’d)
	Field Name	Values		Description
	Call Name			Enables CNI function. Call Name
	Identification			Identification is not the same as Caller
	Enable			ID. When enabled on a given voip
				unit currently being controlled by the
				MultiVOIP GUI (the ‘home voip’),
				Call Name Identification sends an
				identifier and status information to
				the administrator of the remote voip
				involved in the call. The feature
				operates on a channel-by-channel
				basis (each channel can have a
				separate identifier).
				If the home voip is originating the
				call, only the Calling Party field is
				applicable. If the home voip is
				receiving the call, then the Alerting
				Party, Busy Party, and Connected
				Party fields are the only applicable
				fields (and any or all of these could be
				enabled for a given voip channel). The
				status information confirms back to
				the originator that the callee (the
				home voip) is either busy, or ringing,
				or that the intended call has been
				completed and is currently connected.
				The identifier and status information
				are made available to the remote voip
				unit and appear in the Caller ID field
				of its Statistics – Call Progress screen.
				(This is how MultiVOIP units handle
				CNI messages; in other voip brands,
				H.450 may be implemented
				differently and then the message
				presentation may vary.)

295