Multi-Tech Systems MVP-2410/3010 manual ISDN-BRI Telephony Parameters For MVP-410ST/810ST, 212

Technical Configuration (Analog/BRI) MultiVOIP User Guide

ISDN-BRI Telephony Parameters

(for MVP-410ST/810ST)

The following parameters must be known about the PBX or telco central office equipment to which the analog MultiVOIP will connect:

9 ISDN-BRI Phone Parameters	Needed for:
Ask phone company or	MVP810ST
	MVP410ST
telecom manager.

#ISDN-BRI Telephony Interface Parameters:

Record them for this VOIP Site

•In which country is this voip installed?

•Which operator (switch type) is used?

•What type of line coding use required,

A-law or u-law?

•Determine which BRI ports will be network side and which BRI ports will be terminal side.

Write down the values for these telephony parameters (whether analog or ISDN-BRI). You will need to enter these values in the “Interface” screen (analog) or “ISDN Parameters” screen (ISDN-BRI) in the Configuration section of the MultiVOIP software.

212