Multi-Tech Systems MVP-2410/3010, MVP-410ST/810ST manual Phone/IP Details Often Needed/Wanted

Quick Start Instructions MultiVOIP User Guide

Phone/IP Details Often Needed/Wanted

Obtain Email Address for VOIP (for email call log reporting)

required if log reports of
VOIP call traffic	Optional
are to be sent by email

SMTP Parameters
Preparation Task:
Ask Mail Server	To: I.T. Department
	re: email account for VOIP
administrator to set up
email account (with
password) for the
MultiVOIP unit itself.
Be sure to give a unique
identifier to each
individual MultiVOIP	voip-unit2@biggytech.com
unit.

Get the IP address of the mail server computer, as well.

Identify Remote VOIP Site to Call

When you’re done installing the MultiVOIP, you’ll want to confirm that it is configured and operating properly. To do so, it’s good to have another voip that you can call for testing purposes. You’ll want to confirm end-to-end connectivity. You’ll need IP and telephone information about that remote site.

If this is the very first voip in the system, you’ll want to coordinate the installation of this MultiVOIP with an installation of another unit at a remote site.

Identify VOIP Protocol to be Used

Will you use H.323, SIP, or SPP? Each has advantages and disadvantages. Although it is possible to mix protocols in a single VOIP system, it is highly desirable to use the same VOIP protocol for all VOIP units in the system. SPP is a non-standard protocol developed by Multi-Tech. SPP is not compatible with the “Proprietary” protocol used in Multi-Tech’s earlier generation of voip gateways.

50