Multi-Tech Systems MVP-2410/3010, MVP-410ST/810ST, MVP-130/130FXS Automatic Disconnection, 239

MultiVOIP User Guide		Technical Configuration (Analog/BRI)
	Voice/Fax Parameter Definitions (cont’d) )
	Field Name	Values	Description
	Auto Disconnect
	Automatic	--	The Automatic Disconnection
	Disconnect-		group provides four options which
	ion		can be used singly or in any
			combination.
	Jitter Value	1-65535	The Jitter Value defines the average
		milli-	inter-arrival packet deviation (in
		seconds	milliseconds) before the call is
			automatically disconnected. The
			default is 300 milliseconds. A higher
			value means voice transmission will
			be more accepting of jitter. A lower
			value is less tolerant of jitter.
			Inactive by default. When active,
			default = 300 ms. However, value
			must equal or exceed Dynamic
			Minimum Jitter Value.
	Call	1-65535	Call Duration defines the
	Duration	seconds	maximum length of time (in
			seconds) that a call remains
			connected before the call is
			automatically disconnected.
			Inactive by default.
			When active, default = 180 sec.
			This may be too short for most
			configurations, requiring upward
			adjustment.
	Consecutive	1-65535	Consecutive Packets Lost defines
	Packets Lost		the number of consecutive packets
			that are lost after which the call is
			automatically disconnected.
			Inactive by default.
			When active, default = 30
	Network	1 to 65535	Specifies how long to wait before
	Discon-	seconds;	disconnecting the call when IP
	nection	Default =	network connectivity with the
		30 sec.	remote site has been lost.

239