Multi-Tech Systems MVP-410ST/810ST manual 333, When no external routing device is used . If

MultiVOIP User Guide T1 PhoneBook Configuration

Enter Inbound PhoneBook data for your MultiVOIP. The fields of the Add/Edit Inbound PhoneBook screen are described in the table below.

Add/Edit Inbound Phone Book: Field Definitions

Field Name	Values	Description
Accept Any	Values: Y/N
Number	Description: When checked, “Any Number”
	appears as the value in the Remove Prefix
	field.
	The Any Number feature of the Inbound
	Phone Book does not work when an external
	routing device is used (Gatekeeper for H323
	protocol, Proxy for SIP protocol, Registrar for
	SPP protocol).
	When no external routing device is used. If
	Any Number is selected, calls received from
	phone numbers not matching a listed Prefix
	(shown in the Remove Prefix column of the
	Inbound Phone Book) will be admitted into
	the voip on the channel listed in the Channel
	Number field. “Any Number” can be used in
	addition to one or more Prefixes.
Remove Prefix	dialed digits	portion of dialed number to
		be removed before
		completing call to destination
		(often a local PBX)
Add Prefix	dialed digits	digits to be added before
		completing call to destination
		(often a local PBX)
Channel	1-24, or	T1 channel number to which
Number	“Hunting”	the call will be assigned as it
		enters the local telephony
		equipment
		(often a local PBX).
		“Hunting” directs the call to
		any available channel.
Description	--	Describes the facility or
		geographical location at
		which the call originated.
Call Forward	Parameters
Enable	Y/N	Click the check-box to enable
		the call-forwarding feature.

333