Multi-Tech Systems MVP-410ST/810ST, MVP-130/130FXS manual 234, Voice/Fax Parameters Phone Number

Models: MVP-410ST/810ST MVP-130/130FXS MVP-2410/3010

1 559
Download 559 pages 35.93 Kb
Page 234
Image 234

Technical Configuration (Analog/BRI)

MultiVOIP User Guide

 

 

 

 

 

 

Voice/Fax Parameter Definitions (cont’d)

 

 

 

 

 

 

 

 

 

 

Field Name

Values

 

Description

 

 

 

 

 

 

 

 

AutoCall/Offhook Alert

 

 

 

 

Parameters

 

 

 

 

 

 

 

 

 

 

Auto Call /

AutoCall,

 

The AutoCall option enables the local

 

 

Offhook

Offhook

 

MultiVOIP to call a remote MultiVOIP

 

 

Alert

Alert

 

without the user having to dial a Phone

 

 

 

 

 

Directory Database number. As soon as

 

 

 

 

 

you access the local MultiVOIP

 

 

 

 

 

voice/fax channel, the MultiVOIP

 

 

 

 

 

immediately connects to the remote

 

 

 

 

 

MultiVOIP identified in the Phone

 

 

 

 

 

Number box of this option.

 

 

 

 

 

If the “Pass Through Enable” field is

 

 

 

 

 

checked in the Interface Parameters

 

 

 

 

 

screen, AutoCall must be used.

 

 

 

 

 

The Offhook Alert option applies only

 

 

 

 

 

to FXS channels.

 

 

 

 

 

The Offhook Alert option works like

 

 

 

 

 

this: if a phone goes offhook and yet no

 

 

 

 

 

number is dialed within a specific

 

 

 

 

 

period of time (as set in the Offhook

 

 

 

 

 

Alert Timer field), then that phone will

 

 

 

 

 

automatically dial the Alert phone

 

 

 

 

 

number for the voip channel. (The Alert

 

 

 

 

 

phone number must be set in the

 

 

 

 

 

Voice/Fax Parameters Phone Number

 

 

 

 

 

field; if the voip system is working

 

 

 

 

 

without a gatekeeper unit, there must

 

 

 

 

 

also be a matching phone number entry

 

 

 

 

 

in the Outbound Phonebook.). One use

 

 

 

 

 

of this feature would be for emergency

 

 

 

 

 

use where a user goes off hook but does

 

 

 

 

 

not dial, possibly indicating a crisis

 

 

 

 

 

situation. The Offhook Alert feature

 

 

 

 

 

uses the Intercept Tone, as listed in the

 

 

 

 

 

Regional Parameters screen. This tone

 

 

 

 

 

will be outputted on the phone that was

 

 

 

 

 

taken off hook but that did not dial.

 

 

 

 

 

The other end of the connection will

 

 

 

 

 

hear audio from the “crisis” end as is it

 

 

 

 

 

would during a normal phone call.

 

 

 

 

 

 

 

234

Page 234
Image 234
Multi-Tech Systems MVP-410ST/810ST, MVP-130/130FXS, MVP-2410/3010 manual 234, Voice/Fax Parameters Phone Number