Multi-Tech Systems MVP-2410/3010 manual Channel Analog Expansion Card MultiVOIP User Guide, 512

8-Channel Analog Expansion Card MultiVOIP User Guide

3.Using a Phillips driver, remove the three screws that secure the main circuit board and back panel assembly to the chassis.

NOTE:

Follow standard ESD precautions to protect the circuit board from static electricity damage.

back panel screws (3)

Figure D-3: Removing screws from back panel

4.Slide the main circuit board out of the chassis far enough to unplug the power connector.

power connector

Figure D-4: Accessing power connector

5.Unplug the power connector from the main circuit board.

6.Slide the main circuit board completely out of the chassis and place on a non-conductive, static-safe tabletop surface.

7.Remove mounting hardware (2 screws, 2 nuts, and 4 standoffs) from its package.

512