Multi-Tech Systems MVP-410ST/810ST, MVP-130/130FXS Loading MultiVOIP Software onto the PC, 111

MultiVOIP User Guide Software Installation

Introduction

Configuring software for your MultiVOIP entails three tasks:

(1)loading the software onto the PC (this is “Software Installation and is discussed in this chapter),

(2)setting values for telephony and IP parameters that will fit your system (this is “Technical Configuration” and it is discussed in Chapter 5 for T1/E1 MultiVOIP units and in Chapter 6 for analog MultiVOIP units), and

(3)establishing “phonebooks” that contain the various dialing patterns for VOIP calls made to different locations (this is “Phonebook Configuration” and it is discussed in Chapters 7, 8, and 9 for T1, E1, and analog MultiVOIP units respectively).

Loading MultiVOIP Software onto the PC

The software loading procedure does not present every screen or option in the loading process. It is assumed that someone with a thorough knowledge of Windows and the software loading process is performing the installation.

The MultiVOIP software and User Guide are contained on the MultiVOIP product CD. Because the CD is auto-detectable, it will start up automatically when you insert it into your CD-ROM drive. When you have finished loading your MultiVOIP software, you can view and print the User Guide by clicking on the View Manuals icon.

1.Be sure that your MultiVOIP has been properly cabled and that the power is turned on.

111