Multi-Tech Systems MVP-410ST/810ST, MVP-130/130FXS, MVP-2410/3010 manual 249, Dialing Options cont’d

MultiVOIP User Guide		Technical Configuration (Analog/BRI)
	FXO Interface: Parameter Definitions (cont’d)
	Field Name	Values	Description
	Dialing Options (cont’d)
	Inter Digit	50 to 20,000	The length of time between the
	Regeneration	milliseconds	outputting of DTMF digits.
	Time		Default = 100 ms.
	FXO Disconnect On		There are three possible criteria
			for disconnection under FXO:
			current loss, tone detection, and
			silence detection.
			Disconnection can be triggered
			by more than one of the three
			criteria.
	Current Loss	Y/N	Disconnection to be triggered
			by loss of current. That is,
			when Current Loss is enabled
			(“Y”), the MultiVOIP will hang
			up the call when it detects a loss
			of current initiated by the
			attached device.
	Current Loss	integer values	The minimum time required for
	Detect Timer	(in milliseconds )	detecting the current loss signal
			on the FXO interface. In other
			words, this is the minimum
			length of time the current must
			be absent to validate ‘current
			loss’ as a disconnection
			criterion. Default = 500 ms.
	Tone Detection	Y/N	Disconnection to be triggered
			by a tone sequence.

249