Multi-Tech Systems MVP-130/130FXS, MVP-410ST/810ST, MVP-2410/3010 250, FXO Disconnect On cont’d

Technical Configuration (Analog/BRI) MultiVOIP User Guide

FXO Interface: Parameter Definitions (cont’d)

Field Name		Values				Description
FXO Disconnect On (cont’d)
Disconnect		1st tone pair				These are DTMF tone pairs.
Tone Sequence	+					Values for first tone pair are:
		2nd tone pair
						*, #, 0, 1-9, and A-D.
						Values for second tone pair are:
						none, 0, 1-9, A-D, *, and #.
						The tone pairs 1-9, 0, *, and #
						are the standard DTMF pairs
						found on phone sets. The tone
						pairs A-D are “extended
						DTMF” tones, which are used
						for various PBX functions.
				DTMF Tone Pairs						Low Tones
			1		2		3		A
										697Hz
			4		5		6		B	770Hz
			7		8		9		C	852Hz
			*		0		#		D	941Hz
		High Tones	1209Hz		1336Hz		1447Hz	1633Hz
Silence		One-Way or				Disconnection to be triggered
Detection		Two-Way				by silence in one direction only
						or in both directions
						simultaneously.
Silence Timer		integer value				Duration of silence required to
in seconds						trigger disconnection.
Disconnect on		Y/N				Allows call on FXO port to be
Call Progress						disconnected when a PBX
Tone						issues a call-progress tone
						denoting that the phone station
						on the PBX that has been
						involved in the call has been
						hung up.
Ring Count,	1-99					Number of rings required
FXO						before the MultiVOIP answers
						the incoming call.

250