OPERATING THE CD LOADING TRAY

To open the CD loading tray, just press the EJECT button. After in- serting or removing a disc, press the EJECT button again or gently push on the open disc tray, the tray will automatically close.

Vertical Installations

If you are loading a disc in a XM-6401B drive that has been mounted vertically, perform the following procedures:

1.The disc holders (4 locations) are fixed by four projections.

2.Position the disc at the bottom disc holders until it catches. It’s okay if the disc is not secured by the top disc holders.

3.Close the drive by gently pushing in the tray or pressing the eject button.

CD Loading Tray

20TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive

Page 25
Image 25
Toshiba (T)XM6401B/F1 instruction manual Operating the CD Loading Tray, Vertical Installations