Toshiba (T)XM6401B/F1 instruction manual Emergency Eject, Inserting Bar to Eject CD Tray

EMERGENCY EJECT

CAUTION!

The following procedure is intended only as a last resort when pressing the eject button fails to open the CD tray.

1.Turn CD-ROM drive power OFF.

2.Insert a solid bar (i.e. large paper clip*) into Emergency Eject hole and push in as shown in the picture below.

3.CD tray will open/eject.

This procedure cannot be repeated without cycling the CD-ROM’s power. After the media is removed and the loading tray is closed, the tray will not reopen without first turning the power ON/OFF.

*Use a bar that is less than 1.5 mm in diameter. Do not insert more than 50mm in depth. Inserting more than 50mm may damage the CD-ROM drive.

Inserting Bar to Eject CD Tray

TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 21