Toshiba (T)XM6401B/F1 instruction manual Scsi Cabling and Power Connector

CABLING

SCSI - Locate the SCSI interface card connection or SCSI port at the back of your computer. Plug the SCSI cable into socket, making sure it fits snugly. (If the plug has fixing screws or clips, use them to ensure the connector is firmly fixed.) Plug the other end of the cable into one of the sockets found on the back of the CD-ROM drive (the other connector should have a terminator installed, or if daisy-chaining, be attached to another SCSI device). You must use a daisy-chain cable if you are connecting more than one SCSI device to your computer. Only the last drive in the chain will need to have an external termina- tor installed.

Power - Connect power to CD-ROM using the power cord included with your CD-ROM.

SCSI Cabling and Power Connector

Audio (optional) - Audio jacks are located at the rear of the CD- ROM drive. These audio jacks can be used to connect your CD- ROM to an external amplified audio device.

14TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive