Panasonic PT-D10000E manual Network connections, Name and function of network function parts

How to use network function (continued)

Network connections

The projector is equipped with network functions, and web browser controls can be used to carry out the following operations from a computer.

•Projector settings and adjustments

•Projector status display

•Transmission of E-mail messages if there is a problem with the projector

Note

•A LAN cable is required to use the network function.

PC

Projector

LAN cable (straight) LAN cable (straight)

•A Web browser is required to use this function. Make sure that a Web browser is available in the system.

•Use Microsoft Windows 98SE/Me/NT4.0/2000/XP for the OS of your personal computer.

•The Web browser should be Internet Explorer 6.0 or later or Netscape Communicator 7.0 or later.

•To use the E-mail function, communication with E-mail server must be established. Make sure that E-mail feature is available in your system.

•Use a straight insulated LAN cable which supports category 5 or above.

•The length of LAN cable must be 100 m or shorter.

■Name and function of network function parts

IN	OUT
REMOTE 1		REMOTE 2 IN
	IN
	OUT
	VIDEO	S-VIDEO IN

RS-232C IN

R/PR G/Y

SYNC/HD RGB 1 IN

RS-422 IN

SERIAL

B/PB

VD

RGB 2 IN

RS-422 OUT

DVI-D IN

LAN terminal (10BASE-T/100BASE-TX)

Connect LAN cable here.

	LAN LINK/ACT lamp (green)
	This lights when a LAN cable is connected
LAN	and flashes when signals are being received
	or sent.

LAN10/100 lamp (yellow)

This lights when a 100BASE-TX connection is established.

Attention

•If the LAN terminal is touched by electrostatically charged hands (or body), failure may be caused by the discharge of static electricity.

Be careful not to touch metallic part of LAN terminal or LAN cable.

86 – ENGLISH