IP Network Services

Default IP Service – Conferencing – Gatekeeper Parameters

Field

Description

Register as Gateway

Select this check box if the Collaboration Server is to be seen as a gateway, for

 

example, when using a Cisco gatekeeper.

 

Notes:

 

Do not select this check box when using Polycom ReadiManager or a

 

Radvision gatekeeper.

 

Gateway functionality is not supported by Collaboration Server (RMX)

 

1800-0.

 

 

Refresh Registration

The frequency with which the system informs the gatekeeper that it is active by

every __ seconds

re-sending the IP address and aliases of the IP cards to the gatekeeper. If the IP

 

card does not register within the defined time interval, the gatekeeper will not

 

refer calls to this IP card until it re-registers. If set to 0, re-registration is

 

disabled.

 

Note:

 

It is recommended to use default settings.

 

This is a re-registration and not a ‘keep alive’ operation – an alternate

 

gatekeeper address may be returned.

 

 

Aliases

 

 

 

Alias

The alias that identifies the Collaboration Server’s Signaling Host within the

 

network. Up to five aliases can be defined for each Collaboration Server.

 

Note: When a gatekeeper is specified, at least one alias must be entered in the

 

table.

 

Additional aliases or prefixes may also be entered.

 

 

Type

The type defines the format in which the card’s alias is sent to the gatekeeper.

 

Each alias can be of a different type:

 

H.323 ID (alphanumeric ID)

 

E.164 (digits 0-9)

 

Email ID (email address format, e.g. abc@example.com)

 

Participant Number (digits 0-9, * and #)

 

Note: Although all types are supported, the type of alias to be used depends on

 

the gatekeeper’s capabilities.

 

 

10 To view or modify the ports values, click the Ports tab.

Polycom, Inc.

492

Page 523
Image 523
Polycom 1500/1800/2000/4000 manual To view or modify the ports values, click the Ports tab, Aliases