Polycom 1500/1800/2000/4000 manual Use Time Out as Dtmf Delimiter, Meeting Rooms List

Meeting Rooms

Use Time Out as DTMF Delimiter

Users are able to change the behavior of the policy of number collection for VMR Entry Queues, Conference-IDs and Passwords, allowing a time-out to be used as a stop indicator for the input string.

In previous versions, a # input at the end of the input string indicated completion of the input.

The administrator can configure the system, using the ENABLE_DTMF_NUMBER_WO_DELIMITER system flag to change the previous system behavior, allowing a time-out to be used as a stop indicator for the string input for the local IVR, when the MCU collects the Conference-ID in the local Entry Queue or the Password (chairperson or participant) while routed to the conference.

The flag must be manually added to the System Configuration and its value modified as follows:

Value / Description

Flag Name

YES NO

ENABLE_DTMF_NUM	If the timer expires, the received digits
BER_WO_DELIMITER	validated even if there is no delimiter.
	If the received number is not valid, the
	system will prompt again for the number
	according to number of retries. that are
	configured.

This is the default setting for backward compatibility.

If the timer expires because no delimiter is received, the number input is not valid.

The system will prompt again for the number according to number of retries. that are configured.

A System Reset in not required for the flag setting to take effect. For more information see, Modifying System Flags.

Meeting Rooms List

Meeting Rooms are listed in the Meeting Room list pane.

Polycom®, Inc. 269