Polycom 1500/1800/2000/4000 manual Terminal

Appendix C - CDR Fields, Unformatted File

Event Fields for Event 18 - NEW UNDEFINED PARTICIPANT

Field	Description
Chair	Not supported.
	Always contains the value 0.
Video Protocol	The video protocol, as follows:
	1	- H.261
	2	- H.263
	4	- H.264
	255 - Auto
Broadcasting	The broadcasting volume assigned to the participant.
Volume	The value is between 1 (lowest) and 10 (loudest).
	Each unit movement increases or decreases the volume by 3 dB.
Undefined	Indicates whether are not the participant is an undefined participant, as follows:
Participant	0	- The participant is not an undefined participant.
	2	- The participant is an undefined participant.
Node Type	The node type, as follows:
	0	- MCU
	1	- Terminal

Bonding Phone Number

Note: This field is only relevant to ISDN/PSTN participants. The phone number for Bonding dial-out calls.

Bonding is a communication protocol that aggregates from two up to thirty 64 Kbps B channels together, to look like one large bandwidth channel.

Video Bit Rate	The video bit rate in units of kilobits per second.
	A value of 4294967295 denotes auto, and in this case, the rate is computed by the MCU.
IP Address	Note: This field is only relevant to IP participants.
	The IP address of the participant.
	An address of 4294967295 indicates that no IP address was specified for the participant, and
	the gatekeeper is used for routing. In all other cases the address overrides the gatekeeper.
Signaling Port	Note: This field is only relevant to IP participants.
	The signaling port used for participant connection.
	A value of 65535 is ignored by MCU.

H.323 Participant

Alias Type/SIP

Participant Address

Type

Note: This field is only relevant to IP participants. For H.323 participants, the alias type, as follows: 7 - E164

8 - H.323 ID

13 - Email ID

14 - Participant number

For SIP participants, the address type, as follows: 1 - SIP URI

2 - Tel URL

Polycom®, Inc. 937